Why is my paddleboard not inflating?
If one of your inflatable stand up paddleboards is not properly inflating the problem may be in the pump. Although this is rare, the manual pump that comes with every inflatable paddle board package can sometimes malfunction. How long does it take to inflate a paddle board? If you are using a hand pump and have some experience, it takes about 15 minutes to get a board tight and hard to the touch at 15 PSI. If it is your first time, it may take you 20-30 minutes. Electric pumps can inflate a board easier and faster at about 10 minutes.The best inflatable stand-up paddle board PSI level is anywhere from 10 to 15. Most people inflate their board to about 10 to 12 PSI. A higher PSI will help if you are riding in cold or choppy water. If you need a bit more stability, try increasing the PSI of your board as well.It is going to take at least a few hundred pumps to get it to the desired psi for your inflatable paddle board to be fully inflated. It is a bit of a workout before your actual workout as we like to say.Your paddle board is fully inflated when it feels firm to the touch and does not flex under pressure. Most boards have a recommended PSI, typically around 12-15 PSI, which you can check using the gauge on your pump.Make sure you pump directly up and down to avoid damaging the pump. Air will be pumped into the board on up and down strokes. If you are finding it hard on upward strokes, undo the cap found in the middle of the pump to allow air to only be pumped into the board on downward strokes, making it easier to pump.
Do you go slower on an inflatable paddleboard?
The Role of the Board Among these, touring paddle boards are specifically designed to glide through the water at higher speeds due to their narrow and long design. An inflatable board might be lighter, but it often lacks the stiffness of a solid board which can hinder speed. Over inflation: The Leading Cause Overinflation is the most direct path to a paddle board bursting. Boards are designed to operate safely within a specific range of air pressures, measured in PSI (pounds per square inch). Exceeding this limit can strain the board’s materials and seams, potentially leading to a burst.Can you over inflate a stand up paddle board (SUP)? Yes. You can over inflate a paddle board. Theoretically it’s even possible to burst one, if you use the wrong air pump and/or exceed the paddle board manufacturer’s psi recommendations.Generally speaking, lighter paddlers (under 180 lbs) can inflate the board to 15-18 PSI, while heavier paddlers (over 180 lbs) should inflate to 15-22 PSI.Your paddle board is fully inflated when it feels firm to the touch and does not flex under pressure. Most boards have a recommended PSI, typically around 12-15 PSI, which you can check using the gauge on your pump.
Do you pump up or down on a paddle board?
Turn the SUP board valve stem to the CLOSED (UP) position. This may seem counterintuitive, but it works because a closed SUP valve has a rubber stopper on a spring that allows pressurized air to push through the valve while preventing air from coming back out. Turn the SUP board valve stem to the CLOSED (UP) position. If you leave the valve stem in the open position, you will lose all of the air pressure when you remove the hose.Take items out of the bag and lay the board on a clean surface to roll out your SUP. STEP 2: Before you start inflating, be sure that the valve’s yellow pin is in the upright position. This means the valve is closed and will prevent all of the air from rushing out when you are finished pumping.Press and turn counterclockwise to the UP position. This activates the non-return valve and prevents air from escaping when you remove the pump hose.
Is it okay to leave your paddle board inflated?
There is no rule saying you can’t leave your paddle board inflated; however, we strongly recommend that if you’re leaving your paddle board in storage for long periods of time, you should deflate it to keep it in its best possible condition. In summary, it is generally OK to leave your inflatable stand up board fully inflated, provided you follow the manufacturer’s recommendations and store it in a cool, dry place.
How high should I inflate my paddle board?
The best inflatable stand-up paddle board PSI level is anywhere from 10 to 15. Most people inflate their board to about 10 to 12 PSI. A higher PSI will help if you are riding in cold or choppy water. If you need a bit more stability, try increasing the PSI of your board as well. For all-round boards , or boards that you use for multiple purposes, an air pressure of 10-17 PSI (Pounds per Square Inch) is recommended. For race boards , the air pressure is slightly higher, about 15-20 PSI.Generally speaking, we’d suggest aiming for 15-22 PSI. This should ensure that your board reaches the levels of stiffness required for optimum stability, without you having to exert too much effort inflating your board or battle resistance from the valve when deflating it.For all-round boards , or boards that you use for multiple purposes, an air pressure of 10-17 PSI (Pounds per Square Inch) is recommended. For race boards , the air pressure is slightly higher, about 15-20 PSI.
Do you need a special pump for a paddle board?
A SUP electric pump for stand up paddle boards generally tends to offer higher pressure settings, allowing for faster inflation without overheating. When it comes to pressure, make sure the pump you choose is compatible with the recommended PSI for your board. If one of your inflatable stand up paddleboards is not properly inflating the problem may be in the pump. Although this is rare, the manual pump that comes with every inflatable paddle board package can sometimes malfunction.