Why is my paddle board pump not working?
The lack of pressure buildup is caused by a lack of lubricant in the pump or unevenly distributed lubricant. If the pump won’t build pressure all you need to do is add some sort of lubricant, like Vaseline. Unscrew the top of the pump and add a glob of lubricant to the cylindrical piece on the inside. Look at the factory specifications for your pump and ensure that it is receiving the correct electrical power supply in order to work properly. Ensure that all electrical wiring is in good condition, that there are no loose connections and that the electrical current is reaching your pump in the first place.If you are not getting any flow after starting your centrifugal pump, there could be several different causes and remedies. Air in pump — Ensure the pipework and pump are completely filled with liquid. Suction lift is too high — Check for any obstructions in the inlet and verify that static lift is correct.
How do I know if my paddle board is fully inflated?
Your paddle board is fully inflated when it feels firm to the touch and does not flex under pressure. Most boards have a recommended PSI, typically around 12-15 PSI, which you can check using the gauge on your pump. The most common one that we get is assuming the board is at a higher pressure than it actually is and that the pressure gauge on the pump is not working properly. There needs to be a certain amount of air in the board before the gauge is able to register a pressure; this is normally about 4-5 psi.Generally speaking, we’d suggest aiming for 15-22 PSI. This should ensure that your board reaches the levels of stiffness required for optimum stability, without you having to exert too much effort inflating your board or battle resistance from the valve when deflating it.If air comes rushing out of your inflatable paddle board after you remove the pump hose, it is most likely because you had the valve pin set to the open position instead of the closed position. Next time you inflate your board, make sure that the pin is up and not down.Turn the SUP board valve stem to the CLOSED (UP) position. This may seem counterintuitive, but it works because a closed SUP valve has a rubber stopper on a spring that allows pressurized air to push through the valve while preventing air from coming back out.Pump up the board until it reaches 10-15 PSI. It will be easy to pump at first and nothing will register on the inflation valve until the board is pretty stiff. Do not get discouraged, keep pumping. The pump gauge will not register a psi until it gets to at least 7 psi.
How much should I pump my paddle board?
The best inflatable stand-up paddle board PSI level is anywhere from 10 to 15. Most people inflate their board to about 10 to 12 PSI. The best inflatable stand-up paddle board PSI level is anywhere from 10 to 15. Most people inflate their board to about 10 to 12 PSI. A higher PSI will help if you are riding in cold or choppy water. If you need a bit more stability, try increasing the PSI of your board as well.Generally speaking, lighter paddlers (under 180 lbs) can inflate the board to 15-18 PSI, while heavier paddlers (over 180 lbs) should inflate to 15-22 PSI.What Is the Recommended Maximum PSI for My Inflatable Paddle Board? The maximum inflatable stand-up paddle board PSI is 20. We don’t recommend inflating your SUP beyond a PSI of 15, as you will only see small, incremental gains in the board’s rigidity past that point.Generally speaking, lighter paddlers (under 180 lbs) can inflate the board to 15-18 PSI, while heavier paddlers (over 180 lbs) should inflate to 15-22 PSI.Generally speaking, we’d suggest aiming for 15-22 PSI. This should ensure that your board reaches the levels of stiffness required for optimum stability, without you having to exert too much effort inflating your board or battle resistance from the valve when deflating it.
What happens if you over inflate a paddle board?
Over inflation: The Leading Cause Overinflation is the most direct path to a paddle board bursting. Boards are designed to operate safely within a specific range of air pressures, measured in PSI (pounds per square inch). Exceeding this limit can strain the board’s materials and seams, potentially leading to a burst. Exceeding the paddle board weight limit could jeopardize its stability and hinder your fun. Problems may arise if you and your equipment weigh even a little bit more than your paddle board can support. Paddling will be more difficult since your board will be lower in the water.If you overload a paddle board and exceed the weight limit, not only will the board perform poorly, but you and your passenger are also likely to end up in the water, probably more than once.DURABILITY. The durability of your blow up paddle board is important, especially when it’s inflatable. Once a cheap paddle board starts to break down, it tends to be more than just a simple issue and more than likely isn’t worth the effort of fixing so you’ll end up going and buying a new one.All paddle boards have maximum weight guidelines, if you’re nearing these weight limits (remember to include the weight of belongings, pets and passengers!
What PSI do I inflate my paddle board to?
Generally speaking, lighter paddlers (under 180 lbs) can inflate the board to 15-18 PSI, while heavier paddlers (over 180 lbs) should inflate to 15-22 PSI. How long does it take to inflate a paddle board? If you are using a hand pump and have some experience, it takes about 15 minutes to get a board tight and hard to the touch at 15 PSI. If it is your first time, it may take you 20-30 minutes. Electric pumps can inflate a board easier and faster at about 10 minutes.