What’s the difference between cool and warm surf wax?
As the water temp decreases the wax tends to get harder and can get slick so you need a wax that is soft and will stay soft and not get hard in cold water. So with that in mind, Tropical and Warm water wax are harder waxes than Cool and Cold water waxes, Tropical being the hardest wax and cold being the softest wax. When we say hot wax, we are talking about a slightly higher temperature, this wax is applied thicker, left to dry for a moment until it sets and removed. Warm wax is a slightly lower temperature, slightly stickier applied and then a paper or material strip is placed over the wax and removed.Following are the benefits of a cold wax: You can remove the growth in a matter of seconds. Cold waxing is also potentially less painful than warm waxing. This is because you do not run the risk of burning your skin with overheated wax. It is also less messy, and you can dispose of the strips easily.For longer-lasting results, hot wax removes hair from the root more effectively. For convenience and portability, cold wax is more convenient because it does not require pre-heating and comes in ready-to-use strip format. For coarse hair, hot wax because it adheres better.Note: Don’t let any hot water get into your wax, as this could ruin the process! Heat the wax over medium heat until it has completely melted. Don’t let your wax exceed 80°C. If needed, you can use a thermometer to monitor the temperature of your wax as it heats up.
What is the best temperature for wax?
Finding the sweet spot for wax temperature is vital to ensure optimal hair removal results. The ideal temperature range for waxing is typically between 125 to 140 degrees Fahrenheit (50 to 60 degrees Celsius). Within this range, the wax achieves the perfect consistency – neither too thick nor too runny. At what temperature does wax melt? Most candles have a melting between 37-88°C (100-190F), although the differences between each type of wax can be quite large.Wax should be gently warmed to a temperature of 105. F or 41°C or higher is recommended. The heat is essential not just to adhere to the skin but to prevent bacterial growth. The wax cools quickly once it touches the skin.Cool Water Surf Wax falls into the temperature range of 14-19° C, or 58-68° F. This type of surf wax contains lower melting paraffin and more softeners. Warm Water Surf Wax is a unique surf wax formula for water temperatures of 19-23° C, or 66-78° F.For Sticky Warm Water Surf Wax: You need only two ingredients — beeswax and coconut oil. That’s it. Talk about simple) With this recipe you don’t have to worry about the scent as it will smell really nice already.Today’s Surf Wax is a high tech version of the old candles and paraffin that was originally used on surfboards for traction starting in the 1940’s. Today’s wax is formulated to work in specific temperatures. Wax that has been made for colder water is much softer and stickier than wax made for warm water.
Why do people use surf wax?
Without surf wax, even the most skilled surfer would struggle to stay on their board, especially in challenging conditions. The wax creates a sticky surface that prevents slipping, allowing surfers to focus on riding the wave rather than worrying about losing their balance. Van der Waal is the best alternative to surf wax that provides similar levels of grip and traction, but with added convenience and ease of use. Whether you are a seasoned surfer or just starting out, going for a modular traction pad like ours definitely worth considering.
Does surf wax melt in the sun?
Surfboard wax is extremely susceptible to melting in the sun or any hot environment. It’s a sure way to ruin your cars interior and end up with wax everywhere that you really don’t want it to be. Most surfboard wax comes labeled with a water temperature range for which it is ideal. Wax used in water colder than its rating will become hard and not provide the stickiness needed to stay on the board, while wax used in water warmer than its rating may melt.Like cold-water waxes, cool-water waxes are designed to keep the board’s grip in cooler temperatures, and they should not be used as the temperature begins to rise. Warm-water waxes are not resistant to hot temperatures. To be effective, refer to the manufacturer’s application guideline to get maximum board traction.COOL is designed for cold water surfing. The ideal surfboard wax for cold water conditions and ultimate stickiness. Designed for water temperatures 58 F to 74 F / 14 C to 23 C.If you try to use cold water wax in warm water, it will soften and slide right off the board. And if you try warm water wax in cold water, it will be hard as a rock and provide little-to-no grip.
Should you keep surf wax in the fridge?
Keep your surf wax out of direct sunlight and away from extreme temperatures. Your wax will serve you best if you keep it at room temperature whenever possible and work it gently into your board. So, search for a spot in your home that stays cool and a place in your car like the glove compartment. For longer-lasting results, hot wax removes hair from the root more effectively. For convenience and portability, cold wax is more convenient because it does not require pre-heating and comes in ready-to-use strip format. For coarse hair, hot wax because it adheres better.Set board in the sun for about 15 minutes, or carefully apply heat with a heat gun or hairdryer. Scrape wax off with wax comb. If wax remain, use flour or a wax remover to loosen excess wax.You can wax your board before each session if you see fit to do so. Now, with that logic, we highly recommend that you do a full cleaning and re-waxing every two to three months. Unless you surf every day and wax every day, then we recommend cleaning your board slightly more often per season/year.Paying particular attention to how hot your hair removal wax gets is especially crucial because if the wax is too hot, it will burn the skin, and if it’s too cold, it won’t melt enough to cover and stick to the hair follicles. Maintaining wax at a temperature of 105. F or 41°C or higher is recommended.
What are the disadvantages of warm wax?
It is also less painful compared to strip wax because it adheres to the hair rather than the skin, reducing discomfort during removal. However, hot wax can be more time-consuming to apply and requires precise temperature control to avoid burns or ineffectiveness. Not only can ice be used to help with pain relief before your wax, but it can also help temporarily soothe your recently waxed skin, too. After you wax, apply a cold compress to the area on and off for a few minutes. This will help provide the sensitive area with a welcomed cooling sensation.However, if you don’t give your hard wax enough time to melt, it might get too sticky and hard to work with. This can make it tough to spread the wax evenly on your skin and could lead to a less-than-great waxing experience.Finding the sweet spot for wax temperature is vital to ensure optimal hair removal results. The ideal temperature range for waxing is typically between 125 to 140 degrees Fahrenheit (50 to 60 degrees Celsius). Within this range, the wax achieves the perfect consistency – neither too thick nor too runny.The Risks of Waxing Additionally, the aggressive removal of hair against its natural direction can tear the delicate skin, leading to rashes, ingrown hairs, and infections.Red, itchy bumps after a wax are a sign of inflammation and will usually go away pretty quickly. However, these products and steps are known to help alleviate any discomfort: A soothing cool compress, but do not ever apply ice directly to skin. Cortisone cream.