What to do when you buy a new scuba mask?
Apply a drop of defog into each lens, rub it around with your finger tip, then rinse before donning your mask for the dive. If you do not have a commercial defog available, you can also use dish washing soap, shampoo, toothpaste and even saliva! Take a thimble-sized amount of common white non-gritty, non-minty toothpaste and rub it on both sides of the lens while the lens is dry. Avoid gel toothpastes. With clean fingers, give it a good circular rubbing motion and cover the entire lens on both sides. Rinse the lens with clean water to wash away the toothpaste.Rinse Before Wearing: Rinsing your goggles with cold, fresh water before each use can help activate the anti-fog properties. This creates a thin, protective film over the lenses. Avoid Hot Water and Chemicals: Exposure to hot water or harsh chemicals (including soap and detergents) can degrade the anti-fog coating.After scrubbing all parts of the lens, rinse thoroughly with fresh water. If you are not in an immediate rush to use your mask, you may also consider leaving the toothpaste or soft scrub on the lenses overnight. Let your mask dry and then store it back in the original plastic box it came in.Take a thimble-sized amount of toothpaste and rub it on both sides of the DRY lenses. Give it a good circular rubbing with your CLEAN fingers. Rinse the lens while rubbing away the toothpaste.You can also use toothpaste to help prevent fogging. Simply add a small amount of paste to the inside of your lenses and gently brush it with a clean toothbrush. Rinse the paste away and you’ll still be left with a thin layer of it that helps keep your swim goggles from fogging.
How to size a scuba mask?
Comfort & Fit To determine if a mask fits your face, put your regulator or snorkel in your mouth, put the mask on your face (without putting the strap around your head), breath in through your nose, and then hold your breath. Let go of the mask; if it stays on your face, the mask fits. Most scuba masks have an outer and inner seal that are meant to both touch the face. Make sure that the reach of the inner seal touches your face with no gaps. Many prefer to get their masks fitted professionally so that they know they have the optimal fit.Ensure the mask comfortably rests on your face, covering your nose and forming a seal without excessive pressure. Adjust the straps evenly to distribute tension and create a secure fit. Perform a suction test by inhaling gently through your nose to check if the mask stays in place without air leakage.Full face masks cover the nose and mouth to supply air pressure. These masks might be a good choice if: You have nasal blockage or congestion that makes it hard to breathe through your nose. You breathe through your mouth at night despite a month of trying a nasal mask or nasal pillow.Full Face Mask diving is the go-to choice for professionals like public safety divers. These masks shield your eyes and nose from contaminants, keep you comfortable in cold water, and even let you communicate underwater.
How long do scuba masks last?
A mask that is well taken care of and stored properly will often last 10 to 20+ years. How to care for and store a scuba mask? Masks will need regular washing with warm water, a mild soap such as dish soap and a soft brush or cloth. A mask that is well taken care of and stored properly will often last 10 to 20+ years. How to care for and store a scuba mask?
Why put toothpaste on a scuba mask?
New Scuba Diving Masks and Mask Fogging The layer will eventually wear off but it will take time. To remove the layer in one step take a small amount of toothpaste (not whitening toothpaste as it contains abrasive crystals which will scratch the lenses) and rub it over the inside of the lenses. Rinse your Cressi diving mask with fresh water after each use to remove salt, sand, and other debris. Let it dry in a shaded area, avoiding direct sunlight, and store it in a protective case to prevent scratches. Avoid using harsh chemicals or touching the inside of the lens, as this can damage the anti-fog coating.
How do you clean Cressi masks?
Cressi Antifog to clean away all volatile materials and dust that may have collected on the glass. It is also always useful to use saliva as a surfactant before every dive. The most important aspect of choosing a mask is that it fits correctly, doesn’t leak, and is comfortable. Everything else is just a bonus. It’s not unusual that divers may have multiple masks for different types of diving, each one working to optimize a specific type of dive.The good news is that you do not HAVE to be clean shaven to scuba dive, snorkel or freedive! However, as every diver knows, there is nothing worse than having to cope with a leaky mask underwater.Another Cressi Mask to join the ranks of our top rated scuba masks. If you have been diving for a while you have probably come across at least one person using this mask. The extra large lenses provide great visibility.