What size bindings are needed for a wakeboard?
Almost all modern wakeboards use standard M6 mounting hardware and 6 binding plates that are universally compatible across all brands. The only exception is Liquid Force 4D bindings. These bindings are only compatible with wakeboards equipped with a Flextrack, like many modern Liquid Force boards. While most wakeboards will be compatible with any boots it’s not always the case. The standard hole-pattern for a wakeboard boot baseplate is a 6-inch but much older boards/boots will have an 8-inch which will limit compatibility.
Does it matter what bindings I get?
Your choice of snowboard bindings can be narrowed based on the following riding styles: All-mountain: Best for any terrain, including groomed runs, powder, park and pipe. Flex levels of bindings vary based on your skill level and preferred terrain. Most riders choose soft to medium flex, while racers choose stiff flex. They provide control, comfort, and precision. They are a key element of your riding experience and can truly ruin your day if they’re not chosen right. That’s why we’ve created this guide to help you better understand how snowboard bindings work and why they are so important.Burton EST® bindings are the key to unlocking the full potential of The Channel™ mounting system and obtaining maximum snowboard “feel” and terrain feedback. With just two mounting screws per binding, EST snowboard bindings are easy to install, adjust, and fine-tune.Burton Genesis, Malavita and X are some very reputable binding models that can usually last 100 days on snow. Rome is another snowboard brand known for some stellar quality equipment. They use lightweight metal polymer materials that stand up to wear and hold reliable performance.Most modern day snowboard bindings are compatible with most current snowboards, but there ARE some variations. The majority of boards come with a 2×4 or 4×4 mounting pattern, or Burton’s Channel system. A handful of Burton’s kids boards come with their 3D hole pattern.
How to pick the right size bindings?
The best way to check if the bindings are the correct size is to bring them into one of our stores and test them out. Look for gaps between the boot and binding, if they spill over the sides, or overhang at the toe or heel. For them to fit properly the binding size must match up with the boot size. Bindings are sized to fit a range of boot sizes which come in different profiles from brand to brand, therefore adjustments may need to be made to ensure your bindings fit properly.A compatible binding will grip a boot snugly and securely, but without forcing the boot into position or pinching it into place. Bindings should allow your boots to flex, without letting them wobble or shift. Binding straps should not dangle excessively when tightened.If your binding is too small you will struggle to transfer energy to the edges. If your binding is too big you may end up dragging your toes and heels in the snow. Aim to match your boot and binding so that the toe and heel sit around 1/2cm over each edge.
What is the best binding setting for a beginner?
If you’re new to snowboarding, mount your snowboard bindings in what is called the duck stance position, where both feet are angled away from each other. Many snowboarders position the front binding at a 15° angle and the rear binding at somewhere between 0° and a -6° angle. Adjusting Your Binding Angles Most riders prefer their front foot pointing at the nose of their snowboard giving them a positive angle (usually between 9 – 21 degrees) with their front foot. Having this front binding angled towards the nose helps you drive your front foot pressure into a turn.Finding Your Ideal Angle Most riders start with a 15-degree angle on each binding, adjusting as needed for comfort and control. Experimenting with slight adjustments can help you find the sweet spot where you feel most secure.
How do you choose your bindings?
Snowboard Binding Fit Tips Snowboard bindings must accommodate your boot size. A compatible binding will grip a boot snugly and securely, but without forcing the boot into position or pinching it into place. Bindings should allow your boots to flex, without letting them wobble or shift. A binding with a soft to medium flexibility is ideal for beginners. A flexible binding is more forgiving and makes it easier to turn and steer, which is important if you want to improve your balance and control during your first rides on the snowboard.The final step in the process of choosing snowboard bindings is consulting a snowboard binding size chart to figure out your size. Typically, binding sizes range from small to medium to large, with each size accommodating a range of snowboard boot sizes.Beginner wakeboarders should choose wakeboard bindings that are slightly more flexible, or softer, than those that a more experienced rider would use. However, although they should be flexible, they should not be loose! Your bindings should be snug enough to stay on comfortably without feeling too tight.Just like snowboards, bindings come with different options for mounting. There are a variety of mounting options and hole patterns on snowboards, and the binding’s mounting disc holes have to align. In general, most binding discs are compatible with most mount patterns, but it’s good to make sure.