What PSI should I inflate my tower paddle board?
What PSI Do I Inflate My Tower Inflatable SUP Board To? The best inflatable stand-up paddle board PSI level is anywhere from 10 to 15. Generally speaking, lighter paddlers (under 180 lbs) can inflate the board to 15-18 PSI, while heavier paddlers (over 180 lbs) should inflate to 15-22 PSI.Inflatable boards are more stable than solid ones because they have more volume which makes them more stable. Compared to hard paddle board types, inflatable paddleboards are very easy to stand on due to their shape, width, and volume. This is why most SUP yoga instructors and enthusiasts use them.The manual hand pump that comes with your iSUP package takes quite a bit of energy to inflate. It is going to take at least a few hundred pumps to get it to the desired psi for your inflatable paddle board to be fully inflated.The Role of the Board Among these, touring paddle boards are specifically designed to glide through the water at higher speeds due to their narrow and long design. An inflatable board might be lighter, but it often lacks the stiffness of a solid board which can hinder speed.
What happens if you don’t inflate a paddle board enough?
The key is to find the right ratio of air pressure to rigidity for your weight, the conditions and your board. Not too much, not too little. You won’t damage your paddle board if it’s under inflated, but it certainly won’t work as well it’s designed to do. How inflated should paddle boards be? The recommended inflation level for most inflatable paddle boards is between 12 to 15 PSI, but always consult your board’s manual for specific guidelines. Using a reliable pump with a gauge will help you achieve the correct pressure.Performance Limitations: Inflatable paddle boards might not offer the same level of performance as hard boards. They are often less rigid, which can impact their speed and maneuverability. This is particularly noticeable in advanced paddling techniques, racing, or when navigating choppy waters.The cost of an inflatable paddle board can vary greatly depending on several factors, including the size, quality, and brand of the board. Generally, the average cost of an inflatable paddle board ranges from $400 to $2000.Inflatable paddle boards are suitable for all skill levels, from beginners to advanced riders. Their stability and ease of use make them a great choice for those just starting out.Paddle-boarders are most likely to sustain an injury from impact with their own paddle-board, rather than waves, rocks, the sea-bed, other water-craft or litter. The main areas affected tend to be the face/head, knee and foot and ankle.
How do I know if my paddle board is fully inflated?
Your paddle board is fully inflated when it feels firm to the touch and does not flex under pressure. Most boards have a recommended PSI, typically around 12-15 PSI, which you can check using the gauge on your pump. The best inflatable stand-up paddle board PSI level is anywhere from 10 to 15. Most people inflate their board to about 10 to 12 PSI. A higher PSI will help if you are riding in cold or choppy water. If you need a bit more stability, try increasing the PSI of your board as well.For all Tower paddle boards, a PSI of at least 10 should be reached: You should find the last 30-40 pumps to be fairly difficult, but it’s worthwhile to get it to full inflation. Note that the gauge that comes with our pump will not register the air pressure until the board is at at least 7 PSI.Generally speaking, we’d suggest aiming for 15-22 PSI. This should ensure that your board reaches the levels of stiffness required for optimum stability, without you having to exert too much effort inflating your board or battle resistance from the valve when deflating it.The best inflatable stand-up paddle board PSI level is anywhere from 10 to 15. Most people inflate their board to about 10 to 12 PSI. A higher PSI will help if you are riding in cold or choppy water. If you need a bit more stability, try increasing the PSI of your board as well.
How long do inflatable paddle boards take to inflate?
The time required to inflate an inflatable paddle board varies based on the pump type, experience, and target PSI. Manual Hand Pump: Approximately 4-7 minutes for most users. Electric SUP Pump: Around 7 minutes or less, offering a hands-free experience. Do I need to deflate my paddle board after each use? Deflating your SUP board isn’t absolutely required, especially if you’ll be using it again in the near future. However, deflation does offer advantages such as saving storage space and minimizing the risk of long-term inflation damage.If you keep your inflatable SUP inflated for months at a time it will start to slowly release air. This happens extremely slowly however. If for example you leave your SUP inflated for 10 months it may lose 1-2 PSI’s worth of air so nothing that can totally change the integrity of your inflatable paddle boards.With proper care and maintenance, a well-built inflatable paddle board can last anywhere from 5 to 10 years or more. However, it’s essential to keep in mind that the lifespan of your iSUP may vary depending on how often you use it, the conditions in which it’s used and stored, and the quality of construction.Over Expansion in Paddle Boards There is no rule saying you can’t leave your paddle board inflated; however, we strongly recommend that if you’re leaving your paddle board in storage for long periods of time, you should deflate it to keep it in its best possible condition.
Can you over inflate a paddle board?
Over inflation: The Leading Cause Overinflation is the most direct path to a paddle board bursting. Boards are designed to operate safely within a specific range of air pressures, measured in PSI (pounds per square inch). Exceeding this limit can strain the board’s materials and seams, potentially leading to a burst. While paddle boards do have a weight limit, it’s not an absolute number, and each one has its own weight capacity. However, typically, a standard paddle board can accommodate around 200 to 500 pounds. There are also larger ones with higher weight limits that are capable of holding more than 700 pounds.Generally speaking, lighter paddlers (under 180 lbs) can inflate the board to 15-18 PSI, while heavier paddlers (over 180 lbs) should inflate to 15-22 PSI.
Do you inflate paddle board up or down?
Make sure you pump directly up and down to avoid damaging the pump. Air will be pumped into the board on up and down strokes. If you are finding it hard on upward strokes, undo the cap found in the middle of the pump to allow air to only be pumped into the board on downward strokes, making it easier to pump. Attach the free end of the pump hose to the H3 valve on the board and twist clockwise until it locks into place. Pump up the board until it reaches 10-15 PSI. It will be easy to pump at first and nothing will register on the inflation valve until the board is pretty stiff. Do not get discouraged, keep pumping.The PSI gauge will not read until you reach at least 7 PSI. After you reach 9-10 PSI, remove the red cap on the hand pump to make it easier to inflate the remaining 2-5 PSI. Removing the cap on the pump converts the pump from dual action to single action. Keep on pumping until your board reaches 12-15 PSI.All you have to do is plug in one end to the cigarette lighter or attach the clamps to your car battery and put the nozzle into your inflatable paddle board and press start. The pump will do all the work for you. It will stop on its own when the iSUP is inflated to the optimal psi.
Why won’t my paddle board inflate?
The lack of pressure buildup is caused by a lack of lubricant in the pump or unevenly distributed lubricant. If the pump won’t build pressure all you need to do is add some sort of lubricant, like Vaseline. Unscrew the top of the pump and add a glob of lubricant to the cylindrical piece on the inside. Although this is rare, the manual pump that comes with every inflatable paddle board package can sometimes malfunction. The lack of pressure buildup is caused by a lack of lubricant in the pump or unevenly distributed lubricant.