What psi for towable tubes?
Generally the maximum amount of pressure is 0. PSI. Monitor the pressure gauge on the compressor to ensure that the towable tube is being inflated to the desired level. Once the towable tube is fully inflated, turn off the air compressor and unplug it. Pumps: First, it is important to know that tubes do not require high pressure; they are low pressure / high volume products. If you could measure the pressure in a fully inflated tube, it would be around 2 PSI. Most towable tubes can be inflated using one good electric pump or a combination of 12 volt and hand pumps.Inflating & Deflating Rafts The tubes should be filled to a maximum of 2. After the main chambers are inflated, inflate the thwarts until each thwart takes shape. Then top off until firm (about 2–2.
How much horsepower do you need to tow a tube?
Tubing doesn’t require quite as much speed, and you can start to have fun at around 15 miles per hour. A pontoon boat with a 70 horsepower engine is plenty for tubing. At that level, you might be able to get up on skis too, but 90 HP will serve you much better. Typically, boats for tubing will travel at speeds between 20-30 mph. However, it’s important to always follow local boating laws and regulations, and to never exceed the recommended speed for your boat and tube.For example, if your pontoon is a 22-foot boat with a 150hp motor, there are two people in the boat, and you are pulling a few kids on the tube, their ride will be fast and thrilling. But if your pontoon is 16 feet long and has a 115 hp motor and it’s loaded with passengers, the tube ride will be slow and leisurely.The motors used to power tubes need to be able to provide about one horsepower for every 40 pounds of weight. The boat should be able to reach a speed of about 20mph in order to tow a tube. If you plan on towing more than one tube, you should consider a pontoon boat with a higher horsepower.A pontoon boat with a 70 horsepower engine is plenty for tubing. At that level, you might be able to get up on skis too, but 90 HP will serve you much better. After that, the more HP in your engine, the more adventurous you can get with your water sports.
What is the best way to tow a tube on a boat?
Only attach the tube tow rope to a point on the boat designed for that purpose. You may attach the tube tow rope at the transom “ski eye” or transom U-bolt tow point or a tow pylon on the transom. Never attach the rope to a cleat or to the engine. Also, never tow a tube from a wakeboarding or sport tower. To pull a tube, you’ll need a tow rope, and they’re sold based on the number of people you’re planning to tow, so choose appropriately. Like ski ropes, ropes for tubing have a little “give” to them.According to the Water Sports Industry Association (WSIA), tube ropes must be at least 50 feet in length but not exceeding 65 feet. A rope shorter than 50 feet will tow the tube in the crest of the wake spraying the riders in the face.
How many horsepower do you need to pull a tube?
The motors used to power tubes need to be able to provide about one horsepower for every 40 pounds of weight. The boat should be able to reach a speed of about 20mph in order to tow a tube. If you plan on towing more than one tube, you should consider a pontoon boat with a higher horsepower. Your 40 hp motor should be plenty to get them to towing speed, which is slow (10 mph/15kph-ish). There is a LOT of pressure on the tow rope, though, so unless that handle is bolted through the transom, I would look for something stronger.
Is it safe to pull two tubes behind a boat?
Overall, you can safely pull multiple tubes with the TurboSwing but other towing solutions may not be safe for this activity. You should always use caution when pulling multiple riders and be aware of your riders and your environment in order to ensure a safe day on the water! Pull Tubes from Nearly Any Boat by Adding a TurboSwing Turboswing is designed to work cooperatively with virtually any outboard motor, whether you’re planning to pull from a runabout, pontoon boat, fishing boat, cruiser, or other boat style.
What’s it called when you pull a tube behind a boat?
Tubing is an entry level water sport that nearly anyone can take part in, from kids to senior citizens. You can tow a tube with nearly any kind of boat, from pontoons, to bowriders and deck boats. How to keep rope out of water when tubing? According to the Water Sports Industry Association (WSIA), tow ropes for tubing must be at least 50 feet in length, but not to exceed 65 feet. The rope needs to be at least 50 feet otherwise it can cause spraying from the crest of the wave.You should be @ 50-60 feet. You’ll just have to see what’s best for your application. And make sure it’s an extra heavy rope.