Is it difficult to operate a Seabreacher?
It is surprisingly quick to pick up the basic operation of the Seabreacher and learn to navigate on the surface. Prolonged dives and other tricks take a little longer to master, but most pilots are proficient in a couple of days. The controls can be compared to an airplane with 3-axis; pitch, roll, and yaw. The Seabreacher is only meant to dive just beneath the surface for brief durations. You typically do not go lower than 5-6 feet, and it will also depend on your level of experience as a pilot. Most people are under for about 5-10 seconds at a time, and almost always have a portion of the snorkel above the waterline.Speaking of performance, the Seabreacher can dive 5-ft deep for short durations, leap 12 ft into the air, and do barrel rolls, among other tricks. The X can do a 360° barrel roll, but you have to hit it at just the right speed, about 20 to 25 mph, otherwise the dorsal fin interferes,” says Innes.
Where are Seabreachers made?
The hand-crafted Seabreachers are made in their Northern Californian headquarters, Innespace productions, and show the meticulous attention to detail and performance capability characteristic of hot rods. Innespace Productions is a Redding, CA-based company specializing in the production of innovative watercraft. Their Seabreacher X, Seabreacher Y, and Seabreacher Z models offer thrilling and unique experiences for water enthusiasts.
Who owns Seabreacher?
Innespace Productions was founded in 1997 by Rob Innes and Dan Piazza. The company began as a design and development company specializing in high performance submersible watercraft. Innespace Productions was founded in 1997 by Rob Innes and Dan Piazza. The company began as a design and development company specializing in high performance submersible watercraft. Rob Innes is a New Zealand boat builder with fifteen years experience in boat design and manufacturing.The watercraft was designed and developed by two engineers—New Zealander Rob Innes and his partner, American Dan Piazza—who are also the founders of the American company Innespace Inc. It is the production model of the single-seat Innespace Dolphin.
Can a Seabreacher do barrel rolls?
SEABREACHER FEATURES: This allows the vessel to carve left and right, jump over, dive under, and cut though the waves. Our latest model is even capable of 360 degree barrel rolls on the water! Risks when using a Seabreacher Operators have limited ability to determine whether underwater obstructions exist prior to undertaking any diving. Collision damage can reduce a Seabreacher’s ability to float which may result in the vessel sinking.
Are seabreachers safe?
Risks when using a Seabreacher Operators have limited ability to determine whether underwater obstructions exist prior to undertaking any diving. Collision damage can reduce a Seabreacher’s ability to float which may result in the vessel sinking. The Seabreacher is positively buoyant and needs speed in order to dive, which means the engine needs to be running and needs fresh air to breathe. The moment you dive too deep, the engine’s air supply is cut off and the engine immediately loses power, however, it will always pop back to the surface.