How to know when a paddle board is fully inflated?
Your paddle board is fully inflated when it feels firm to the touch and does not flex under pressure. Most boards have a recommended PSI, typically around 12-15 PSI, which you can check using the gauge on your pump. For all-round boards , or boards that you use for multiple purposes, an air pressure of 10-17 PSI (Pounds per Square Inch) is recommended. For race boards , the air pressure is slightly higher, about 15-20 PSI.Most SUP boards should be inflated to a maximum of 15 PSI or approx. If you want to use a SUP board, it is important to use the correct air pressure. The correct air pressure depends on the type of board you use and the conditions in which you will use the board.The best inflatable stand-up paddle board psi level is anywhere from 10 to 15. Most people inflate their board to about 10 to 12 psi. A higher psi will help if you are riding in cold or choppy water. If you need a bit more stability, try increasing the psi of your board as well.Generally speaking, we’d suggest aiming for 15-22 PSI. This should ensure that your board reaches the levels of stiffness required for optimum stability, without you having to exert too much effort inflating your board or battle resistance from the valve when deflating it.For all-round boards , or boards that you use for multiple purposes, an air pressure of 10-17 PSI (Pounds per Square Inch) is recommended. For race boards , the air pressure is slightly higher, about 15-20 PSI.
How do I pump up my paddle board and not let air out when I take off the pump?
Take items out of the bag and lay the board on a clean surface to roll out your SUP. STEP 2: Before you start inflating, be sure that the valve’s yellow pin is in the upright position. This means the valve is closed and will prevent all of the air from rushing out when you are finished pumping. Turn the SUP board valve stem to the CLOSED (UP) position. This may seem counterintuitive, but it works because a closed SUP valve has a rubber stopper on a spring that allows pressurized air to push through the valve while preventing air from coming back out.Press and turn counterclockwise to the UP position. This activates the non-return valve and prevents air from escaping when you remove the pump hose. Press and turn clockwise to the down position. This deactivates the non-return valve and allows air from escaping from the inflatable stand up paddleboard.
How many pumps to inflate a paddle board?
It is going to take at least a few hundred pumps to get it to the desired psi for your inflatable paddle board to be fully inflated. It is a bit of a workout before your actual workout as we like to say. Most inflatable SUPs require inflation pressures between 10-15 PSI, but always check your board’s specifications. Inflation Speed and Efficiency: Consider how quickly and easily the pump can inflate your board.