How much horsepower do you need to tow a tube?
Tubing doesn’t require quite as much speed, and you can start to have fun at around 15 miles per hour. A pontoon boat with a 70 horsepower engine is plenty for tubing. At that level, you might be able to get up on skis too, but 90 HP will serve you much better. Horsepower and Speed Tubing doesn’t require quite as much speed, and you can start to have fun at around 15 miles per hour. A pontoon boat with a 70 horsepower engine is plenty for tubing. At that level, you might be able to get up on skis too, but 90 HP will serve you much better.While you don’t have to have a high-powered speedboat (no, really, you don’t) to tow, you’ll want at least 150 HP in order to pull a skier or wakeboarder. Pontoon boats can pull tubes, but most don’t have quite the power to pull skiers and wakeboarders. Start off slow by gradually bringing the throttle forward.The motors used to power tubes need to be able to provide about one horsepower for every 40 pounds of weight. The boat should be able to reach a speed of about 20mph in order to tow a tube. If you plan on towing more than one tube, you should consider a pontoon boat with a higher horsepower.Keep the boat speed between 8 to 12 mph for small kids. For teenagers and adults, it’s okay to speed up to 15 to 20 mph. The ideal towing speed depends on the rider’s comfort and water conditions. You’ll need to slow down when the water is rough.If your pontoon boat has a 115hp engine, you’ll likely be able to tow tubes or ski even with a full boat. It won’t be as much of fun as with only 4 or 5 people, but you’ll be fine.
Can a 50 hp boat motor pull a tube?
You can pull a tube with a 15 hp outboard. You’ll go a little slower, but kids aren’t obsessed with speed at that age. A 50 will pull a tube faster than what is safe speed. Iv pulled a tube with mine plenty of times and I have a 50hp. The hard part is keeping the rope out the water I added a booster ball to help. Mine only does 26 or 27 loaded down with riggers and rods.
How big of a motor do I need to pull a tube?
The motors used to power tubes need to be able to provide about one horsepower for every 40 pounds of weight. The boat should be able to reach a speed of about 20mph in order to tow a tube. If you plan on towing more than one tube, you should consider a pontoon boat with a higher horsepower. For every forty pounds of boat weight, you need one horsepower to motor along over smooth waters at 20 miles per hour. So, for a 4,000-pound boat, that’s 100 horsepower for smooth, steady cruising. For an 8,000-pound boat, that’s 200 horsepower.Keep the boat speed between 8 to 12 mph for small kids. For teenagers and adults, it’s okay to speed up to 15 to 20 mph. The ideal towing speed depends on the rider’s comfort and water conditions. You’ll need to slow down when the water is rough.Tubing doesn’t require quite as much speed, and you can start to have fun at around 15 miles per hour. A pontoon boat with a 70 horsepower engine is plenty for tubing. At that level, you might be able to get up on skis too, but 90 HP will serve you much better.Keep the boat speed between 8 to 12 mph for small kids. For teenagers and adults, it’s okay to speed up to 15 to 20 mph. The ideal towing speed depends on the rider’s comfort and water conditions. You’ll need to slow down when the water is rough.