How many HP do you need to pull a tube?
The motors used to power tubes need to be able to provide about one horsepower for every 40 pounds of weight. The boat should be able to reach a speed of about 20mph in order to tow a tube. If you plan on towing more than one tube, you should consider a pontoon boat with a higher horsepower. What kind of boat do you use for tubing? For tubing, it’s best to use a motorized boat that has enough horsepower to pull the weight of the tube and riders. Ideally, the boat should also have a wide beam for stability and an inboard motor for safety.The thumb rule is to have one horsepower for 25-40 pounds of weight. That means if your vessel weighs around 800 pounds, you need a minimum of 30 HP – 40 HP outboard strength. Depending on the exact use and weight, a 5,000-pound boat might need an outboard between 125 HP to 200 HP.Horsepower And Speed Tubing doesn’t require quite as much speed, and you can start to have fun at around 16 miles per hour. A pontoon boat with a minimum of 70-90 horsepower will give you the ability to get you tubing. At that level, you might be able to get up on skis too, but 115 HP will serve you much better.
Can a boat go 100 knots?
How Fast Do Speed Boats Go? Speed boats are designed for performance, offering a blend of power and agility that allows them to slice through the water at impressive speeds. Most recreational speed boats can reach speeds between 60 and 100 knots (69-115 mph). Based on available information from boating forums and related sources, here’s a concise estimate: • General Speed Range: A 20 hp outboard on a 1448 mod-V Jon boat typically achieves speeds between 19–27 mph under varying conditions.
Can a 90 hp boat pull a tube?
Tubing doesn’t require quite as much speed, and you can start to have fun at around 16 miles per hour. A pontoon boat with a minimum of 70-90 horsepower will give you the ability to get you tubing. At that level, you might be able to get up on skis too, but 115 HP will serve you much better. Tubing won’t require as much HP as skiing. You could tube with as little as 50 HP (although you won’t go very fast). But if you want to ski, you’d best consider at least 115 HP (more if you’re pulling an adult slalom skier).