How do you calculate the volume of a stand up paddle board?
In a Stand Up Paddleboard (SUP) board, this is the amount of volumetric space measured in cubic litres (the amount of foam or flotation in litres). Roughly, a SUP’s length x width x thickness will yield its volume. Falling into the water and not being efficiently prepared or trained can cause major issues for those taking part in SUP. Weather conditions can also make paddle boarding difficult and could hamper participants being able to return to the board fully.In summary, a SUP and a paddle board refer to the same watercraft used for the sport of stand-up paddleboarding. SUP refers slightly more to the activity, of actually standing, rather than solely the board being used.SUP is a fun and generally low impact sport. However, the wrong choice of equipment, poor technique, muscle imbalances, tension and overuse can lead to muscles strains or joint injuries.
Should I leave my paddle board inflated?
All inflatable paddle boards will lose air pressure over time when left inflated, but it’s also key to remember that air pressure expands in extreme heat. If you’re storing the board somewhere particularly warm, it’s best to let out a little air to avoid any damage. Overinflation is the most direct path to a paddle board bursting. Boards are designed to operate safely within a specific range of air pressures, measured in PSI (pounds per square inch). Exceeding this limit can strain the board’s materials and seams, potentially leading to a burst.Not inflating your paddle board correctly You need to inflate your paddle board to the recommended PSI. If you don’t inflate it enough, it’ll lose its rigidity and flop around, making it harder for you to paddle. On the other hand, inflating it too much will cause your board to pop due to excess pressure.For short term storage, leaving your board inflated is absolutely fine, permitting it’s in the perfect storage spot as we outlined above. All inflatable paddle boards will lose air pressure over time when left inflated, but it’s also key to remember that air pressure expands in extreme heat.Generally speaking, lighter paddlers (under 180 lbs) can inflate the board to 15-18 PSI, while heavier paddlers (over 180 lbs) should inflate to 15-22 PSI.All paddle boards have maximum weight guidelines, if you’re nearing these weight limits (remember to include the weight of belongings, pets and passengers!
How do I know if my paddle board is inflated enough?
Pump, pump, pump and you’ll see the gauge needle dance around a bit. Once you reach 12-15psi, the needle will hold it’s position a little better, however, the gauge will only read while you are pumping and the air is being pushed into the board. Pump up the board until it reaches 10-15 PSI. It will be easy to pump at first and nothing will register on the inflation valve until the board is pretty stiff. Do not get discouraged, keep pumping. The pump gauge will not register a psi until it gets to at least 7 psi.Attach the free end of the pump hose to the H3 valve on the board and twist clockwise until it locks into place. Pump up the board until it reaches 10-15 PSI. It will be easy to pump at first and nothing will register on the inflation valve until the board is pretty stiff. Do not get discouraged, keep pumping.
How do I know if my paddle board is fully inflated?
Your paddle board is fully inflated when it feels firm to the touch and does not flex under pressure. Most boards have a recommended PSI, typically around 12-15 PSI, which you can check using the gauge on your pump. The best inflatable stand-up paddle board PSI level is anywhere from 10 to 15. Most people inflate their board to about 10 to 12 PSI. A higher PSI will help if you are riding in cold or choppy water. If you need a bit more stability, try increasing the PSI of your board as well.Generally speaking, lighter paddlers (under 180 lbs) can inflate the board to 15-18 PSI, while heavier paddlers (over 180 lbs) should inflate to 15-22 PSI.The best inflatable stand-up paddle board PSI level is anywhere from 10 to 15. Most people inflate their board to about 10 to 12 PSI. A higher PSI will help if you are riding in cold or choppy water. If you need a bit more stability, try increasing the PSI of your board as well.What PSI Do I Inflate My Tower Inflatable SUP Board To? The best inflatable stand-up paddle board PSI level is anywhere from 10 to 15. Most people inflate their board to about 10 to 12 PSI. A higher PSI will help if you are riding in cold or choppy water.
Should I deflate my paddle board after every use?
Do i need to deflate my paddle board after each use? Deflating your sup board isn’t absolutely required, especially if you’ll be using it again in the near future. However, deflation does offer advantages such as saving storage space and minimizing the risk of long-term inflation damage. Over expansion in paddle boards there is no rule saying you can’t leave your paddle board inflated; however, we strongly recommend that if you’re leaving your paddle board in storage for long periods of time, you should deflate it to keep it in its best possible condition.How Long Can You Leave a SUP Inflated? You can leave your inflatable paddle board inflated indefinitely, as long as you store your board correctly. If you release air, keep your board out of sunlight, and in a cool, dry place, your inflatable board can remain inflated, and little to no damage will come to it.With proper care and maintenance, a well-built inflatable paddle board can last anywhere from 5 to 10 years or more. However, it’s essential to keep in mind that the lifespan of your iSUP may vary depending on how often you use it, the conditions in which it’s used and stored, and the quality of construction.