Can you put wax on a foam surfboard?
Yes, a soft top surfboard needs wax too! Foamies appear rubbery but when wet they get slippery. Apply basecoat wax 2. Apply soft (bodyboard) surf wax 3. Your foam surfboard can get a bit slippery when it gets wet so we usually recommend putting on a little bit of wax.Whether that’s before every surf session, every other session, or seasonally, it’s totally up to you. Just be sure to give that board of yours a fresh de-waxing once in a while in order to prevent buildup and to ensure your new layer of wax will stick!Wax is your friend and will prevent you slipping out and wasting waves. Do note, that the foam decks of these surfboards make you prone to rash, so you might want to wear a rash guard like a T-shirt or surf shirt when paddling out.For surfers who surf multiple times a week, it is essential to always have a fresh, thin coat of wax or at least replace the basecoat monthly. For occasional surfers, they can surf with the same coat on until the water temperature changes.
What happens if you don’t wax your surfboard?
The wax gives you all the grip you need to ride your board – without this, forget surfing! It’s also key to make sure you get the right wax to go on your board depending on the temperature of the water you plan to surf in, this will give you the best possible grip and therefore the best performance. If you don’t wax your snowboard, you’ll start to notice several things happen over time; reduced overall performance of your board, namely agility and speed, and a shorter lifespan.After applying the topcoat, the small bumps formed by the undercoat become noticeable. One important thing to remember is that more is not better. Using too much wax can actually make it more difficult to surf. These waxes are the most popular form of surfboard waxes because they apply both basecoats and topcoats.If you have a high-end foam board , a little wax may be necessary to optimize grip, especially if you surf in more powerful waves. If you feel the need for better grip, no worries! A thin layer of classic wax will do the job perfectly.Wax Application Pressing too hard can lead to over-application. Excessive wax makes it more challenging to stay upright and actually makes the board more slippery, increasing your chances of falling. Apply the right amount of wax until you create bumps at least one millimetre high across the board’s riding area.
Can you put wax on a soft top?
Most soft tops are pretty slippery and can benefit from a little wax. Not a full coat like on a normal board, but just enough to add a little grip. It’s a good idea to check the wax condition of your board before each surf session. Each time you surf, the wax will get smoother and less sticky. Most surfers apply a light coat of topcoat before they hit the water. This ensures that the wax is tacky and bumpy each time they surf.If you feel the need for better grip, no worries! A thin layer of classic wax will do the job perfectly.Your foam surfboard can get a bit slippery when it gets wet so we usually recommend putting on a little bit of wax.In conclusion So, if you’re looking for a clean and eco-friendly solution for your surfboard traction, RSPro HexaTraction and Cork Traction are the perfect choice. Say goodbye to wax and embrace the future of surfboard traction.
Do softech boards need wax?
Do I need to wax my Softboard? We recommend waxing your softboard very lightly before each session to ensure maximum grip while your surfing. Keep your surf wax out of direct sunlight and away from extreme temperatures. Your wax will serve you best if you keep it at room temperature whenever possible and work it gently into your board. So, search for a spot in your home that stays cool and a place in your car like the glove compartment.Traction pads are the most popular alternative to surf wax. Traction pads provide a solid grip, making it easier for the surfer to maintain their footing on the board. They also protect the board from damage caused by the surfer’s foot.If so, then understand that you may have to wax it before use, depending on how good its grip is when surfing for the first time. Foam boards aren’t as slippery as unwaxed hard-top boards, but they can easily get slippery when wet.It usually has a scent added to it – something you will recognise when you walk into most surf shops – and again these days most brands are trying to use more natural oils and resins to do this. Surf wax is applied to the deck (the top) of your surfboard to provide traction and stop you slipping off it.
How to care for a foam surfboard?
After every surf, make sure to rinse your board with fresh water to remove any excess dirt, sand or salt residue. Wipe down your board with a clean towel & make sure it’s stored in a cool, dry location that won’t receive direct sunlight. Set board in the sun for about 15 minutes, or carefully apply heat with a heat gun or hairdryer. Scrape wax off with wax comb. If wax remain, use flour or a wax remover to loosen excess wax.Lay out all of your tools along side the surfboard on the grass. Note: Being neat and tidy will help you a lot during this task.Clean the damaged area with acetone or rubbing alcohol to remove any wax, dirt, or debris. Ensure that the area is completely dry before proceeding.
What are the cons of foam surfboards?
CONS OF FOAMIE SURFBOARDS: ❌ Limited Performance: Foamies tend to be heavier and less manoeuvrable, making it harder to progress to advanced turns and manoeuvres. A waterlogged surfboard—whether a soft-top foamie or a fiberglass PU board—is significantly heavier, harder to maneuver, and can deteriorate over time. Many surfers wonder if drying out their board is possible and whether it’s worth the effort.CONS OF FOAMIE SURFBOARDS: ❌ Limited Performance: Foamies tend to be heavier and less manoeuvrable, making it harder to progress to advanced turns and manoeuvres. Slower Speed: The soft surface creates more drag in the water, meaning you won’t generate as much speed as a hard board.In general, a foam soft-top surfboard should last between 5 – 10 years. Foam surfboards are durable, so you can be sure that your board will last a while! An average surfer who surfs somewhere between a few times a month to a few times a week and cares for their board properly can expect their board to last years.Construction Types: Foamie vs. Soft Top. All foamies are soft tops, but not all soft tops are foamies. Both are typically made from expanded polystyrene (EPS foam), a lighter, more buoyant material than the polyurethane (PU) foam used in most traditional surfboards.