How do you stop the air coming out of the paddleboard when removing the pump?
To Inflate – Valve pin UP Press and turn counterclockwise to the UP position. This activates the non-return valve and prevents air from escaping when you remove the pump hose. For all Tower paddle boards, a PSI of at least 10 should be reached: You should find the last 30-40 pumps to be fairly difficult, but it’s worthwhile to get it to full inflation. Note that the gauge that comes with our pump will not register the air pressure until the board is at at least 7 PSI.Attach the free end of the pump hose to the H3 valve on the board and twist clockwise until it locks into place. Pump up the board until it reaches 10-15 PSI. It will be easy to pump at first and nothing will register on the inflation valve until the board is pretty stiff. Do not get discouraged, keep pumping.Generally speaking, we’d suggest aiming for 15-22 PSI. This should ensure that your board reaches the levels of stiffness required for optimum stability, without you having to exert too much effort inflating your board or battle resistance from the valve when deflating it.Pump, pump, pump and you’ll see the gauge needle dance around a bit. Once you reach 12-15psi, the needle will hold it’s position a little better, however, the gauge will only read while you are pumping and the air is being pushed into the board.
Do paddle boards lose air?
If you keep your inflatable SUP inflated for months at a time it will start to slowly release air. This happens extremely slowly however. If for example you leave your SUP inflated for 10 months it may lose 1-2 PSI’s worth of air so nothing that can totally change the integrity of your inflatable paddle boards. Your paddle board is fully inflated when it feels firm to the touch and does not flex under pressure. Most boards have a recommended PSI, typically around 12-15 PSI, which you can check using the gauge on your pump.Over Expansion in Paddle Boards There is no rule saying you can’t leave your paddle board inflated; however, we strongly recommend that if you’re leaving your paddle board in storage for long periods of time, you should deflate it to keep it in its best possible condition.Generally speaking, we’d suggest aiming for 15-22 PSI. This should ensure that your board reaches the levels of stiffness required for optimum stability, without you having to exert too much effort inflating your board or battle resistance from the valve when deflating it.Not inflating your paddle board correctly You need to inflate your paddle board to the recommended PSI. If you don’t inflate it enough, it’ll lose its rigidity and flop around, making it harder for you to paddle. On the other hand, inflating it too much will cause your board to pop due to excess pressure.
Why is my paddle board sinking?
All paddle boards have maximum weight guidelines, if you’re nearing these weight limits (remember to include the weight of belongings, pets and passengers! Does Paddle Boarding Burn Belly Fat? While you can’t target belly fat exclusively (your body loses fat as a whole, not from specific areas), paddle boarding can indeed help reduce overall body fat, including belly fat.A good paddle boarding session will raise your pulse and quicken your breathing in order to keep all your working muscles supplied with oxygenated blood. In other words, paddle boarding provides excellent cardiovascular exercise, which promotes general fitness.On average, you’ll burn 330 to 460 calories per hour while recreational paddle boarding. That’s twice the calories you’d burn walking your neighborhood! The average, recreational (all around) paddle is done on calm water with light winds at a walking pace.Only paddle in light winds. Strong wind can make paddleboarding much harder, especially on an inflatable SUP. Winds strength over 10knots/12mph/3Bf) are best avoided. DO NOT paddle if there is a risk of thunder/lightening.Overinflation is the most direct path to a paddle board bursting. Boards are designed to operate safely within a specific range of air pressures, measured in PSI (pounds per square inch). Exceeding this limit can strain the board’s materials and seams, potentially leading to a burst.
What is the life expectancy of an inflatable paddle board?
With proper care and maintenance, a well-built inflatable paddle board can last anywhere from 5 to 10 years or more. However, it’s essential to keep in mind that the lifespan of your iSUP may vary depending on how often you use it, the conditions in which it’s used and stored, and the quality of construction. There is no rule saying you can’t leave your paddle board inflated; however, we strongly recommend that if you’re leaving your paddle board in storage for long periods of time, you should deflate it to keep it in its best possible condition.For short term storage, leaving your board inflated is absolutely fine, permitting it’s in the perfect storage spot as we outlined above. All inflatable paddle boards will lose air pressure over time when left inflated, but it’s also key to remember that air pressure expands in extreme heat.You can generally keep an inflatable paddle board inflated for a short duration, ranging from a few days to a week, particularly if you use it frequently. However, leaving it inflated for extended periods could lead to gradual wear and tear.For short term storage, leaving your board inflated is absolutely fine, permitting it’s in the perfect storage spot as we outlined above. All inflatable paddle boards will lose air pressure over time when left inflated, but it’s also key to remember that air pressure expands in extreme heat.If you keep your inflatable SUP inflated for months at a time it will start to slowly release air. This happens extremely slowly however. If for example you leave your SUP inflated for 10 months it may lose 1-2 PSI’s worth of air so nothing that can totally change the integrity of your inflatable paddle boards.