What is a plinth in a kitchen?
Plinths are sometimes referred to as a kick board or kick plate and are used to bridge the gap between the floor and the bottom of your cabinets to hide away cabinet legs, cables, and pipes, leaving your kitchen to look sleek and tidy. As a rule, the plinth block has to be thicker than the skirting board and architrave – its sole purpose is fulfilled by this. However, if you want the top of the plinth block to be level with the top of the skirting and the sides of the plinth block level with the sides of the architrave – go for it.Plinth skirting essentially creates a solid base at floor level. There’s no recessed gap for you to place your feet. Skirting is designed to completely cover the feet or legs of the kitchen cabinets. In-line plinths, which you may or may not have heard of, run continuously along the base of the kitchen cabinets.A plinth block (also known as a skirting block) is simply a piece of MDF or wood which is slightly thicker and wider than your skirting board and architrave.
Are kitchen plinths a standard size?
Understanding Plinth Sizes The standard height for a kitchen plinth is 150mm. This uniform size allows kitchen installers to operate with ease and ensures consistency in design. However, due to varying floor levels, adjustments may be needed. Plinth sealing strips offer a convenient method for hiding unfinished edges, ensuring plinth protection and maintaining the aesthetic integrity of your kitchen. They might require cutting to match the length of the plinth but are easily attached, effectively sealing the gap between the floor and the plinth.Plinths are sometimes referred to as a kick board or kick plate and are used to bridge the gap between the floor and the bottom of your cabinets to hide away cabinet legs, cables, and pipes, leaving your kitchen to look sleek and tidy.Plinth Raw Plinths are designed to complete your cabinetry project – use them to cover the gap between the floor and base cabinets or as filler pieces to cover small gaps between cabinets. Choose a plinth in the same finish as your doors and drawers for a seamless finish or mix and match for a bespoke look.Apply our plinth sealer strips underneath a plinth to seal the underside where raw material is exposed. This stops any water ingress from the kitchen area, which means more durable and long lasting plinths.Plinths are sometimes referred to as a kick board or kick plate and are used to bridge the gap between the floor and the bottom of your cabinets to hide away cabinet legs, cables, and pipes, leaving your kitchen to look sleek and tidy.
Do modern kitchens have plinths?
While you might be focused on these bigger features, don’t overlook the charm of cornices, plinths, and panelling—they’re the delightful touches that can truly elevate a traditional or contemporary kitchen design! You may have seen on some of our customers’ kitchens that their plinths are more ornate and not recessed. This is because the customer has used actual skirting boards from the main kitchen and incorporated them in front of the kitchen units and island, if they have one.Generally speaking, Plinth Blocks should be taller than the skirting boards for the best results. We always recommend choosing the next height option above your skirting. For example: if you have 145mm tall skirting boards, choose the 170mm height option for your Plinth Blocks.Plinth skirting essentially creates a solid base at floor level. There’s no recessed gap for you to place your feet. Skirting is designed to completely cover the feet or legs of the kitchen cabinets. In-line plinths, which you may or may not have heard of, run continuously along the base of the kitchen cabinets.The size you choose for this option will be down to how wide your architraves are. We always recommend choosing a larger width for your plinth blocks than the width of your architrave. For example – if you have architrave that is the standard 70mm wide, you should choose the 90mm width for your Plinth Blocks.
How wide is a kitchen plinth?
Plinth – 100-200mm height x 2540mm. Essentially, the plinth area refers to the area of ground covered by a building’s foundation, and it is measured in square feet (ft²).Calculate area: Multiply the length and width to calculate the plinth area. Ensure that the measurements are in feet to keep the area in square feet.The plinth area is defined by the Indian Standard (IS) 3861-2002 as “the constructed covered area calculated at the floor level of the basement or of any storey. The plinth area is normally 10%-20% larger than the carpet area of a house and is widely used to measure the length of flats and apartments.In the Plinth area method, the cost of construction is determined by multiplying the plinth area with the plinth area rate. The area is obtained by multiplying length and breadth (outer dimensions of the building).Understanding Plinth Sizes The standard height for a kitchen plinth is 150mm. This uniform size allows kitchen installers to operate with ease and ensures consistency in design. However, due to varying floor levels, adjustments may be needed.
Are kitchen plinths removable?
Most kitchen plinths will attach using clips that secure to the cupboard feet. It’s a simple system that holds the plinth securely into place but allows easy removal for cleaning or maintenance. Lay the plinth face down with the bottom edge against the run of cabinet legs. Mark the positions of the leg onto the back of the plinth using a pencil. Position the plinth clip bracket to the plinth, aligning the notch with the pencil mark and secure using the screws provided.Mark the position of the feet with a pencil halfway up the back of the plinth board, then screw a clip bracket into each mark, before sliding the clips into each bracket, and lifting the plinth into place so that each clip grips each foot of the cabinet.Installing a plinth block is really very simple. Apply an adhesive (such as Gripfill) to the reverse of the plinth block and hold firmly in position at the base of the door frame, so that the outer edge (closest to the door) is flush with the door frame and the top edge is level and not on a slant.
How to fit a plinth in a kitchen?
Lay the plinth face down with the bottom edge against the run of cabinet legs. Mark the positions of the leg onto the back of the plinth using a pencil. Position the plinth clip bracket to the plinth, aligning the notch with the pencil mark and secure using the screws provided. Attaching the Legs For wooden cabinets, use plain wood screws directly into the wooden surface for the most simple and durable fitting method. A small 1-2mm pilot hole is suggested for hardwoods to ease the screw in and reduce the risk of cracking your cabinet’s base.
What is the best material for kitchen plinth?
Wood boards: among wood derivatives such as chipboards, plywood and MDF, the latter is the most used. Lower cost and easier to install than natural wood. Aluminum: This metallic material is currently a widely used option due to its hardness and distinctive surface, attractive and desired for modern kitchens. The most durable materials for kitchen cabinets include solid wood, plywood, MDF (Medium-Density Fiberboard), and stainless steel. Each offers unique benefits in terms of strength, resistance to damage, and longevity.Material Strength: Moisture-resistant MDF or plywood are excellent choices. Stay away from cheap plastics that crack easily over time. Colour Matching: We recommend matching the kickboard to your cabinet fronts. This creates a seamless look and helps avoid visual distractions in the space.