Where is Exile Skimboards based?
For over 20 years, Exile has been grinding out the best skimboards on the planet from our factory in San Clemente, CA. When Exile Skimboards moved from the garage to the factory in 2002 we had one goal. Typically, the best time for skimboarding is usually around low tide. In this case, the water should be shallow enough to allow the board to glide across the surface, but not so deep that it becomes hard to control your skim board.The ideal water depth is anywhere from just a few millimetres to 10 centimetres, as the aquaplaning effect doesn’t last long enough in deeper water. Skimboards are small and handy and can therefore be taken everywhere.Traditional skimboards are not made with buoyancy in mind, however, some designed for bigger waves will have more float to help with longer rides.Skimboards are built to take a beating. They must be if their intended use is slamming into the pounding surf and riding the waves into the shore. If you hit the beach a few times a week, one board can last over a year. If you wait longer between skim sessions, it can last much longer.
What are exile skimboards made of?
Exile uses only Aerospace Grade Carbon Fiber and Epoxy resin, making these boards stronger, stiffer and lighter than our fiberglass boards. Truly the best skimboard money can buy and the trusted construction of all our top Professional riders. There are two main types of skimboards based on the material used for their construction – foam or wood, and foam boards. Foam boards come in a sandwich construction where foam core is placed between layers of fiberglass and epoxy.First of all, choose a skimboard that fits your height and weight requirements. A board too big will be too difficult to maneuver; a board too small won’t hold your weight, and you will spend more time in the sand than in the water.Epoxy Glass Fibre or Carbon Fibre Skimboards Both these types of construction are the real deal for serious skimboarders. They’re lighter, float better, and have a rocker (upward curve) for efficient turning and carving. These boards are thicker with a larger surface area, perfect for catching waves further out.Wooden boards are more suitable for flatland (also inland) skimming. Because they are heavier (have low buoyancy), wooden skimboards also sink quicker, therefore, it is better to use them in shallow waters.Epoxy Glass Fibre or Carbon Fibre Skimboards Both these types of construction are the real deal for serious skimboarders. They’re lighter, float better, and have a rocker (upward curve) for efficient turning and carving. These boards are thicker with a larger surface area, perfect for catching waves further out.
Are foam skimboards better than wood?
Foam skimboards are playful, have high buoyancy and are perfect for kids and recreational use. Given their flexibility and water flotation, they are the preferred choice of those skimmers that want to ride the waves in the sea. Wooden skimboards are heavier than foam skimboards and suitable for flatland skimming. These are the most technical style of boards, and while they don’t vary too much in shape – as wooden skimboards do – they do come in a variety of technical levels, from beginner to intermediate to advanced. Foam skimboards also cost considerably more because they are more difficult and expensive to make.Skimboarding is similar to surfing as it is also a waterboard sport. Skimboarding can be easier to learn versus surfing. However, catching and riding the waves is harder than surfing. Skimboarding is a harder sport to master than surfing for most.Boogie boards are more maneuverable and have greater control, making them better for more experienced surfers. Skimboards are the lightest and most agile of all boards. This makes them ideal for riders searching for the ultimate wave-riding experience.Wave riding skimboarders refer to their board as a skimboard. However to inland skimborders it is referred to as a foamie.Skimboarding is harder. It has a steeper, painful learning curve that requires punishing tumbles on the sand. Someone learning to surf can catch a wave in their first session, but it can take months, or years, for someone learning to skimboard to accomplish the equivalent and ride their first wave.
Is skimboarding an extreme sport?
Conclusions: Previous studies on skimboarding have demonstrated the risk of extremity fractures and soft tissue injuries. Spinal cord injury should be considered an additional risk associated with skimboarding, particularly as the sport has grown in popularity and become more ‘extreme’ in the maneuvers performed. A skimboard is not attached to your feet which makes the feel of the board and the way of riding very similar to skateboarding. You control the board and balance in the same position and with the same part of your foot.Most skimboarders prefer to use a combination of wax and traction pads to help stay on their skimboard.For some people, skimboarding is harder than surfing because it requires a sprinting effort for speed plus you have to jump on this moving object and make sure your feet are set just right!Strengthens Core and Leg Muscles Skimboarding engages your core and leg muscles constantly. From running to gain momentum, to jumping up on your board, to keeping steady on top of your board, you need strong core and leg muscles to stay upright.
Is skimboarding safer than surfing?
How Dangerous is Skimboarding? You are unlikely to drown while skimboarding as you are in very shallow water. Due to falls and landing you are more likely to bruise or have musculoskeletal injuries than surfing. This is due to the acrobatics and falls that skimmers perform. Flatland skimboarding (also known as inland skimboarding) is a form of skimboarding practiced on non-coastal waters, such as a river, lake, stream or puddle. It uses a wooden board about three times as wide as a skateboard and one and a half times as long. The board is thrown across a thin film of water.The beginnings of skimboarding can be traced back to Laguna Beach, California, in the 1920s. Two lifeguards in Laguna Beach, George Griffiths and his friend Jimmy, came up with the idea of using round discs made of redwood to help them slide easily across the water.