What is the best way to tow a tube on a boat?
Only attach the tube tow rope to a point on the boat designed for that purpose. You may attach the tube tow rope at the transom “ski eye” or transom U-bolt tow point or a tow pylon on the transom. Never attach the rope to a cleat or to the engine. Also, never tow a tube from a wakeboarding or sport tower. Transom eyes or tie-downs provide plenty of strength for towing an inflatable tube, and plenty of boaters often use these as anchor points for tow ropes.
Are towable tubes safe?
Only tow a tube if the boat has a qualified driver and capable observer. Tow in control; ‘getting air’ is fine, but overdoing it, especially on multi-person models, can slam riders’ bodies into each other or objects and cause severe injuries. Tubing doesn’t require quite as much speed, and you can start to have fun at around 15 miles per hour. A pontoon boat with a 70 horsepower engine is plenty for tubing. At that level, you might be able to get up on skis too, but 90 HP will serve you much better.The motors used to power tubes need to be able to provide about one horsepower for every 40 pounds of weight. The boat should be able to reach a speed of about 20mph in order to tow a tube. If you plan on towing more than one tube, you should consider a pontoon boat with a higher horsepower.Keep the boat speed between 8 to 12 mph for small kids. For teenagers and adults, it’s okay to speed up to 15 to 20 mph. The ideal towing speed depends on the rider’s comfort and water conditions. You’ll need to slow down when the water is rough.For example, if your pontoon is a 22-foot boat with a 150hp motor, there are two people in the boat, and you are pulling a few kids on the tube, their ride will be fast and thrilling. But if your pontoon is 16 feet long and has a 115 hp motor and it’s loaded with passengers, the tube ride will be slow and leisurely.Generally, it’s recommended to keep a distance of at least 50-60 feet between the boat and the tube. This distance ensures that the riders have plenty of room to enjoy the ride and avoid any potential collisions.
How long should a tube rope be behind a boat?
According to the Water Sports Industry Association (WSIA), tube ropes must be at least 50 feet in length but not exceeding 65 feet. A rope shorter than 50 feet will tow the tube in the crest of the wake spraying the riders in the face. Find the Right Length According to the Water Sports Industry Association (WSIA), tow ropes for tubing must be at least 50 feet in length, but not to exceed 65 feet. The rope needs to be at least 50 feet otherwise it can cause spraying from the crest of the wave.Be sure the anchor line is strong and long enough to anchor your boat. A good rule of thumb is that the length of the line should be at least seven to ten times the depth of the water where you are setting anchor.It is recommended that you use a scope of 7:1, meaning that for every foot of water depth, you should use 7 feet of rode. For example, to anchor in 10 feet of water, you would pay out 70 feet of line. Measure the scope as the ratio of the length of the anchor rode to the height of the bow above the bottom.Do: Use a towline of at least eight to 10 boat lengths. Anchor line will suffice, due to its length and strength.
Is it safe to pull two tubes behind a boat?
Overall, you can safely pull multiple tubes with the TurboSwing but other towing solutions may not be safe for this activity. You should always use caution when pulling multiple riders and be aware of your riders and your environment in order to ensure a safe day on the water! With quick and easy installation, TurboSwing easily allows you to pull tubes, wakeboarders, and more from your boat’s transom. Thanks to its unique design, TurboSwing raises your tow point which in turn prevents water spray on your riders, prevents rope drag, and provides more air when wakeboarding behind the boat.