How to know when a paddle board is fully inflated?
Your paddle board is fully inflated when it feels firm to the touch and does not flex under pressure. Most boards have a recommended psi, typically around 12-15 psi, which you can check using the gauge on your pump. The best inflatable stand-up paddle board psi level is anywhere from 10 to 15. Most people inflate their board to about 10 to 12 psi. A higher psi will help if you are riding in cold or choppy water. If you need a bit more stability, try increasing the psi of your board as well.For all-round boards , or boards that you use for multiple purposes, an air pressure of 10-17 PSI (Pounds per Square Inch) is recommended. For race boards , the air pressure is slightly higher, about 15-20 PSI.The best inflatable stand-up paddle board PSI level is anywhere from 10 to 15. Most people inflate their board to about 10 to 12 PSI. A higher PSI will help if you are riding in cold or choppy water. If you need a bit more stability, try increasing the PSI of your board as well.For all-round boards , or boards that you use for multiple purposes, an air pressure of 10-17 PSI (Pounds per Square Inch) is recommended. For race boards , the air pressure is slightly higher, about 15-20 PSI.For all Tower paddle boards, a PSI of at least 10 should be reached: You should find the last 30-40 pumps to be fairly difficult, but it’s worthwhile to get it to full inflation. Note that the gauge that comes with our pump will not register the air pressure until the board is at at least 7 PSI.
How to pump an inflatable paddle board?
Make sure your psi gauge is in-line, so you can read the inflation level as you pump. Attach the free end of the pump hose to the H3 valve on the board and twist clockwise until it locks into place. Pump up the board until it reaches 10-15 PSI. Pump, pump, pump and you’ll see the gauge needle dance around a bit. Once you reach 12-15psi, the needle will hold it’s position a little better, however, the gauge will only read while you are pumping and the air is being pushed into the board.Attach the free end of the pump hose to the H3 valve on the board and twist clockwise until it locks into place. Pump up the board until it reaches 10-15 PSI. It will be easy to pump at first and nothing will register on the inflation valve until the board is pretty stiff. Do not get discouraged, keep pumping.
How many pumps to inflate a paddle board?
It is going to take at least a few hundred pumps to get it to the desired psi for your inflatable paddle board to be fully inflated. It is a bit of a workout before your actual workout as we like to say. How long does it take to inflate a paddle board? If you are using a hand pump and have some experience, it takes about 15 minutes to get a board tight and hard to the touch at 15 PSI. If it is your first time, it may take you 20-30 minutes. Electric pumps can inflate a board easier and faster at about 10 minutes.The electric paddle board pump is about 1 minute per PSI. So about 10-15 minutes for any of the inflatable paddle board.Generally speaking, lighter paddlers (under 180 lbs) can inflate the board to 15-18 PSI, while heavier paddlers (over 180 lbs) should inflate to 15-22 PSI.
How do I pump up my paddle board and not let air out when I take off the pump?
Take items out of the bag and lay the board on a clean surface to roll out your SUP. STEP 2: Before you start inflating, be sure that the valve’s yellow pin is in the upright position. This means the valve is closed and will prevent all of the air from rushing out when you are finished pumping. Turn the SUP board valve stem to the CLOSED (UP) position. If you leave the valve stem in the open position, you will lose all of the air pressure when you remove the hose.Turn the SUP board valve stem to the CLOSED (UP) position. This may seem counterintuitive, but it works because a closed SUP valve has a rubber stopper on a spring that allows pressurized air to push through the valve while preventing air from coming back out.Turn the SUP board valve stem to the CLOSED (UP) position. This may seem counterintuitive, but it works because a closed SUP valve has a rubber stopper on a spring that allows pressurized air to push through the valve while preventing air from coming back out.
Is it better to leave an inflatable paddle board inflated?
There is no rule saying you can’t leave your paddle board inflated; however, we strongly recommend that if you’re leaving your paddle board in storage for long periods of time, you should deflate it to keep it in its best possible condition. If you keep your inflatable sup inflated for months at a time it will start to slowly release air. This happens extremely slowly however. If for example you leave your sup inflated for 10 months it may lose 1-2 psi’s worth of air so nothing that can totally change the integrity of your inflatable paddle boards.With proper care and maintenance, a well-built inflatable paddle board can last anywhere from 5 to 10 years or more. However, it’s essential to keep in mind that the lifespan of your iSUP may vary depending on how often you use it, the conditions in which it’s used and stored, and the quality of construction.